Trend All in One Worktop Jig

Check Delivery Cost
Stock Code: KWJ900
£205.19 (inc VAT)
Out of Stock
Quantity: - +

Tradesman ALL IN ONE work top jig for up to 900mm worktops.

  • Hard wearing solid laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up.
  • Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4 inch BSP hole for mixer taps.
  • Fixed lengths for 400mm, 500mm, 550mm, 600mm, 616mm, 650mm, 700mm and 90mm wide worktops.
  • Cuts up to 40mm thick worktops with or without anti-drip postformed edge.
  • Three open-ended bolt recesses for 150mm bolts.
  • Engraved lines for short 65mm bolts and worktop cross-cut.
  • 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up.
  • Engraved markings for identification of pin holes.